As one of the leading spiral wound gasket manufacturers, we have 5 types of spiral wound metallic gaskets:

•  JSG-SW10: R Type Spiral Wound Gasket 
• JSG-SW20: CGI Type Spiral Wound Gasket
• JSG-SW30: CG Type Spiral Wound Gasket
• JSG-SW40: RIR Type Spiral Wound Gasket
• JSG-SWH: Spiral Wound Gasket for heat exchangers
• JSG-SWC: Customized Spiral Wound Gasket

• Item no.: JSG – SW20,
• CGI spiral wound gasket with inner ring and outer ring, for raised & flat face flange.

For example: SS304/SS304+FG/CS spiral wound gaskets CGI are supplied with an external and an internal ring that is suitable for use on flat face and raised face flanges and can be especially for high pressure or temperature environments or where corrosive or toxic media exists. The inner ring gives the gasket a greater resistance to thermal shock and prevents the filler material from being sucked in when in the case of vacuum services as well as gives an additional compression limiting stop and prevents inward buckling ring. Always the inner ring’s material is typically the same as the winding material but can be provided in other materials depending on the services.

• Item no.: JSG – SW30
• SWG with only outer ring, for raised / flat face flange
• For example: SS304/FG CS Gasket

Ginseal provides CG type spirotallic gasket (with only outer ring). These spiral wound flange gaskets are proved to be suitable in most applications, and allow lower clamping forces than solid gaskets, albeit with a higher cost.

The spiral wound gasket copes with an outer ring made from stainless steel, carbon steel or other material like Duplex, Monel or Nickel are always for applications of raised face flanges. The outer ring works as a center ring that fix the gasket on the flange faces by providing the blow-out resistance of the windings as well as works as a compression stop. The CG spiral wound is a good general-purpose gasket and suitable for use with a flat face and raised face flanges.

• Item no.: JSG – SW40
• SWG with only inner ring &. without the outer ring, it’s suitable for the male and female flange.

RIR type spiral wound gasket with inner ring and without outer ring is mainly used in the male and female flange. The solid inner ring acts as a compression stop and fills the annular space between the flange bore and the inside diameter. It’s designed for use on a heat exchanger where the sealing area is limited. The inner ring’s use can prevent accumulations of solids as well as reduce the turbulent flow of process fluids and minimize erosion of flange faces.

• Item no.: JSG – SWH
• Spiral Wound Gasket for heat exchanger.

For Example SS304/FG with 1 bar of Double Jacketed. Ginseal H type spiral wound gasket is a kind of heat exchanger spiral wound gasket which is created for heat exchangers, It’s same with common spiral wound gaskets in structural type except that barrettes(bar) are required and the bars/ribs are securely fastened to the ID of the gasket. Always the barrettes are always double jacketed type or kammprofile type in the same material of windings and fillers.
H type spiral wounds can also be equipped with an external ring and an internal ring to provide better stability but kindly refer to Ginseal technical team for the use of applications.

Spiral Wound Gasket Material For Rings:

Low Carbon Steel, SS304, 304L, SS316, SS316L, SS321, SS347, SS 410, Aluminium, Copper, Brass, Nickel 200, Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium (see spiral wound gasket size chart and more information in our products catalog)

How To Choose Filler

The important part is the sealing element (also called spiral wound gasket filler) made up of V-formed SS strip and non- metallic filling tape, the material can be changed according to different chemical compatibility requirements.

• Spiral wound gasket graphite filler strip is good to be used in a high-temperature environment,
• PTFE Spiral wound gasket filling strip is for acids and another corrosive medium.
• Spiral wound gasket non-asbestos’ use is increased when the health problems with asbestos became known. But it’s only recommended for low temperature less severe applications due to the rubber content.
• Ceramic is for extremely high-temperature applications. The filler is not so common as it cannot achieve the same leak tightness as graphite

Marking (standard):

Marking on the outer ring:
– Manufacturer
– Nominal Size – Pressure Range
– Winding material + Filler Material
– Manufactured to (standard)
For example: GINSEAL 2”150# SS304/SS304+F.G./CS ASME B16.20

Spiral Wound Gasket Specification

We deliver according to the following standards: ASME B16.20, ASME B16.47 Series A & Series B, ANSI B16.5, BS1560, BS EN1092, DIN, JIS, etc.

How To Order

1 — Nominal pipe size or specific gasket dimensions
2 — Pressure rating
3 — winding and filler materials
4 — centering / outer ring or inner ring material

Packaging & Shipping:

Ginseal Spiral wound gaskets are the ideal gaskets in the semi-metallic gasket for different environments.
The spiral wound metallic gaskets can be used in gas turbines, abrasive media, nitric acid service, hydrofluoric. Slurry pumps, ASME B16.20 flanges, ASME B16.5 flanges, ANSI BS 1650, steam services, tongue and groove flanges, heat exchangers, chemical processing and etc.

A V-shaped metal hoop works as spring providing structural support. According to different service environments and different flanges, spiral wound gaskets are always supplied in different materials and types.

Spiral wound gaskets are extremely widely used many applications and there exist a variety of styles and sizes. Ginseal has heat exchanger spiral wound gaskets, customized oval spiral wound gaskets, and kamprofile/spiral wound gaskets and dimensions that can be customized or according to the standard of ASME B16.20, JIS, DIN, BS 3381, BS EN 1514-2 and etc.
They are easiest to install and suitable for the equipment in which the gasket suffers extreme temperature or pressure cycling, shock, or vibration. Even when the spiral wounds’ sealing faces are slightly corroded or bent they can also provide stability and scalability due to their solid constructions.

Click here to contact us to get spiral wound gasket dimensions and specifications.

Filler for Spiral Wound Gasket

Hoop for Spiral Wound Gasket

Rings for Spiral Wound Gasket

Metal Jacketed Gasket

The post Spiral Wound Gasket appeared first on .

As one of the leading Kammprofile Gasket Manufacturers, we have the professional Kammprofile Gasket manufacturing factory. There are 3 types of Kammprofile Gasket.

Basic Type Camprofile Gasket

• Item No.: JSG-KM11
• Grooved gasket without the guide ring, it’s used for tongue & groove or male & female flange. Typically used as a heat exchanger gasket, as an upgrade to double jacketed gaskets when a lower load is needed.

Kammprofile Gasket WIth Loose Outer Ring 

• Item No.: JSG-KM12,
• Grooved metal gasket with loose outer ring type is regarded as a problem solver for heat exchanger, large vessels and equipment.
• The outer metallic ring works as a centering ring during installation on a flange. While the sealing layers on both sides protect the flange surface and reinforced the seal.

Kammprofile Gasket WIth Fixed Outer Ring

• Item No.: JSG-KM13
• A fixed outer ring type camprofile gasket is also called an integral outer ring type is for aligning purposes. It’s used in raised flanges.

Due to the serrated gaskets’ excellent compression and recovery characteristics, kammprofiles can maintain joint tightness under pressure and temperature fluctuations, temperature differential across the flange face, flange rotation, bolt stress relaxation, and creep.
Ginseal kammprofile gaskets’ serrated peaks provide a reduced contact area. Serrated metal gasket with soft layers on both sides provide a virtual metal-to-metal connection and the gaskets have excellent resistance to the blowout and superior stability for ease of handling and installation.

Ginseal always supply metal kammprofile gaskets with the thickness from 2mm to 4mm, 3mm is the most common thickness in petrochemical applications (mean the SS core thickness).

Core Design

The standard kammprofile style gasket core design is parallel which offers the advantages of even stress distribution across the gasket face. The convex core is a reduced depth of the grooves towards the profile centre, ensuring high seating stress in the middle of the core and is effective for low bolt load applications
Core thickness is usually 3.0 mm (0.125″) (nominal); Other thicknesses and materials are available
Standard facing thickness is 0.5 mm (0.020″); Other thicknesses and materials are available

Kammprofile Gasket Material/Core Material

Low Carbon Steel, SS304, 304L, SS316, SS316L, SS321, SS347, SS 410, Aluminium, Copper, Brass, Nickel 200, Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium
(see more kammprofile gasket specification in our products catalogue)

Layer Material

Flexible Graphite, PTFE, EPTFE, Non-asbestos, Silver (see more information in our kammprofile gasket catalog)

Marking (standard):

Marking on the outer ring: (please see the above picture for your reference.)
– Manufacturer
– Nominal Size – Pressure Range
– Core Material + Filler Material
– Manufactured to (standard)

Packages &.Shipment:

As one of the best kammprofile gasket manufacturers, Ginseal has been involved in sealing product manufacturing for over 20 years. Our sealing gasket have won praise from many countries all over the world, especially in the USA, the UK, Japan, Australia, Germany, Spain, Germany, and etc.

Metal Jacketed Gasket

Corrugated Gaskets

Reinforced Graphite Gasket

Kammprofile Gasket Machine

Graphite Tape / Self-Adhesive Graphite Tape

The post Kammprofile Gasket – Grooved Gasket appeared first on .

Ring joint gasket and metal ring gasket from Ginseal Ring Joint Gasket Manufacturer offers high temperature and pressure sealing with good recovery performance. 

There are 4 types of ring type joint gasket:

RTJ Gasket Size Chart

Type R ( oval/ octagonal ) Ring Type Gasket

• Item No.: JSG – RJR1 / JSG- RJR2

R Style seal ring gasket or named oval gasket as the basic type of RTJ gasket is available in both oval and octagonal configurations, the octagonal ring joint gasket is recommended in higher sealing efficiency, both types are interchangeable on modern octagonal type grooved flanges. However, only the oval cross-section can be used in the old type round bottom groove as the oval ring gasket are the original type of RTJs.

R type ring gaskets are manufactured in accordance with ASME B16.20 followed with ASME B16.5 flanges, class 150 to 2500. They are designed for sealing pressure up to 6,250 psi according to ASME B16.5 pressure ratings.

R series flange ring gasket is available in ring numbers R11 up to R105, Ginseal also can provide customized R type RTJs with drawings.

Type RX RTJ Ring Gasket

• Item No.: JSG – RJRX

Ginseal RX ring type joints are similar in the shape of the octagonal ring gasket, while the RX type rings’ cross-section is designed to take advantage of the contained fluid pressure in effecting a seal. RX ring joint gaskets are also manufactured according to API 6A, ASME B16.20. The ring-type joints are used at pressures up to 15000 psi, and the RX type is wider than R type joints in this way the flange face to face separation will be higher compared with the R type gaskets.

RX ring joint flange gasket is a pressure- energized adaptation of the standard Style R gasket. The modified design uses a pressure – energized effect that improves the efficiency of the seal as the internal pressure of the system increases.

Type BX RTJ Joint Gasket

• Item No.: JSG – RJ BX

BX pressure energized gaskets are manufactured in accordance with API 6A and are designed for use on pressurized systems up to 20, 000 PSI. On both the inner and outer diameters, all BX RJ gaskets incorporate a pressure balance hole to ensure equalization of pressure that may be trapped in the grooves.

BX type ring joint flange gaskets are engineered for the highest pressure ratings up to 20,000 psi compared with R type & RX type ring joints. They cannot be interchangeable with any other types like R type or RX type. It is a typical solution required by a special arrangement.

Blowout resistance, opening in the axial direction gives the BX type ring type joint gaskets the function of balancing the pressure loads in the situation when the inner sealing barrier is not tight.

BX ring gaskets are manufactured only in the dimension standards to NPS 30.

Type SBX / SRX

• Item No.: JSG – RJ SBX/ RT SRX

Type SRX and SBX metal ring joint gaskets are manufactured as per API 17D for Subsea environment and Tree Equipment are vented to prevent pressure lock when connections are made up underwater. They have the same dimensions as Type RX & BX RTJ ring joint gasket with the same number designation, and also they are suitable for the same corresponding connectors. The “S” prefix shows these gaskets have vent holes, allowing a pressure less when underwater. With the vent holes, any water trapped between a ring groove bottom and the sealing area of the gasket can escape to the equipment I.D. bore.

Ginseal RTJ gaskets are designed to seal by “initial line contact” or wedging action between the mating flange and the gasket. It is essential to choose a softer metal of the gaskets while the flange’s material should be harder to make sure the ring type joints can give a very tight and efficient seal after applying pressure on the sealing interface through bolt force. Usually, the ring gaskets are used in oil, petroleum and chemical process fields. As precision machined, metallic sealing rings, ring joints are suitable for high pressure and high-temperature applications.

Ring Joint Gasket Material

There’s a variety of material can be selected for the RTJ gasket material according to a different application.
Check as below:
Soft Iron, Low Carbon Steel, Stainless Steel 304, Stainless Steel 304L, Stainless Steel 316, Stainless Steel 316L, Stainless Steel 321, Stainless Steel 347, Stainless Steel 410, Aluminum, Copper, Brass, Nickel 200, Monel 400, Inconel 600, Hastelloy B2, Titanium (see more ring joint gasket specifications in our products catalog)

Marking and Identification (standard):

The outer surface of each Ring Type Joint should show the manufacturer’s name or a trademark, the gasket number like R67, RX37 or BX155, gasket’s material in abbreviation(check below our chart), as well as the standards like ASME B16.20, API 6A, API 17D, etc.

Packages & Shipment:

Ginseal is a professional ring joint gasket manufacturer in addition to being a gasket supplier&distributor. Whether you are looking for oval ring gasket, octagonal ring gasket, RX ring gasket, and BX gasket, SRX, SBX ring joint gasket，contact our sales team to meet your delivery needs.

Metal Jacketed Gasket

Ring Joint Gasket / Lens Gasket

Spiral Wound Gasket

Die-Formed Ring

The post Ring Joint Gasket appeared first on .

Besides DIN 2696, there are also other standards that describe particular shapes and dimensions in detail.
Ginseal also provides non-standards lens metal gasket based on the provided drawings.
Unlike Ring type joint gaskets, Lens gaskets are reusable, as the sealing effect is generally achieved by elastic deformation of the surfaces.

Details About Lens Gaskets

• Item No.: JSG-RJL
• Lens gaskets are normally used as high-pressure gaskets.
• Lens gaskets are stress-resistant.
• The seating area of the lens assembled in the turned flange groove
• Increases by increasing bolt load.
• One disadvantage, however, is that under high pressure and
• Temperatures, the circumference of the gasket lens may bulge which
• This leads to loss of initial load.
• Other designs are available on request.

Material

Soft Iron, Low Carbon Steel, Stainless Steel 304, Stainless Steel 304L,
Stainless Steel 316, Stainless Steel 316L, Stainless Steel 321, Stainless
Steel 347, Stainless Steel 410, Aluminium, Copper, Brass, Nickel 200,
Monel 400, Inconel 600, Hastelloy B2, Titanium (see more information
In our products catalog)

Marking (standard):

– Manufacturer
– Nominal Size – Pressure Range
– Material
– Manufactured to (standard)

Packages & Shipment

Ring Joint Gasket

Spiral Wound Gasket

Kammprofile Gasket – Grooved Gasket

Die-Formed Ring

The post Ring Joint Gasket / Lens Gasket appeared first on .

Detail Information About PTFE Enveloped Non-Asbestos Gasket

GINSEAL, one of the leading PTFE envelope gasket manufacturers in China, has been involved in sealing gasket manufacturing for over 20 years. Our PTFE envelope gaskets are available slit (v-type) or milled (square cut) with a variety of materials available for fillers.

Type A Envelope Gasket PTFE 

• Item No.: JSG-PT31
• Made in the material forming a “V” shape space for one filler. The point of the “V” protrudes slightly into the pipe causing slight flow turbulence.

Type B& C PTFE Teflon Gasket

• Item No.: JSG-PT32 & JSG-PT33
• Material is milled or machined out between leaves to form a U or square shaped space for the filler. The filler is flush with the envelope which is flush with the pipe, permitting free flow.
• A larger size is also available. (Folded envelope)

PTFE Enveloped Non-Asbestos Gasket Material:

Material for filler: Non-asbestos, EPDM, reinforced graphite, etc.

Packages &.Shipment:

As a top Non Asbestos gasket factory, Ginseal continuously offers clients not only products with high standard, but also individually tailored solutions. Our PTFE Enveloped Non Asbestos Gasket has been exported to the United States, Canada, Germany, Malaysia, Vietnam, the Philippines, and other countries. Our products are loved and praised by local customers. We will continue to provide high-quality sealing gaskets to our friends

PTFE / Teflon Gasket

Reinforced Graphite Gasket

Non-asbestos Gasket

PTFE Sheet

The post PTFE Enveloped Non Asbestos Gasket appeared first on .

As one of the leading PTFE gasket manufacturers, there are 3 types of PTFE Gasket in our factory.

Virgin PTFE Flat Gasket

• Item No. JSG-PT10
• Made of pure virginal PTFE material, GINSEAL PTFE gasket is a cost-favorable
• Alternative for use with low mechanical stress and low pressure-temperature load. The
  Teflon seal gasket is highly resistant to practically all chemicals except for fluorine, halogen oxides, molten and dissolved alkali metals.
• It is available as a plate and die-cut gasket as per DIN EN 1514-1 and in other usual dimensions as well as in special-purpose dimensions.
• Recommended continuous operating temperature: Max. 150 ° C
  Operating pressure: Max. 6 bars

PTFE Flat Gasket with Glass fiber

• PTFE Gasket Material: A compound consisting of modified, hence cold flow reduced PTFE with A glass fiber fraction of 25%.
• Pressure / temperature: PN 16 / 150 ° C
• Attention! Consider pressure-temperature dependence
• Use: Steel flange, steel container

Expanded PTFE Gasket

• Item No.: JSG-PT20
• Die-cut gasket made from multi-directional stretched expanded PTFE
• Expanded PTFE gasket properties
  • Gasket thickness: 1; 1.5; 2; 3; 4, 5; 6 mm other thicknesses is available
  • Pressure: 40 bars
  • Temperature: -200 ° C to 225 ° C
• Application: Steel flange, steel container, enamel flange, enamel container,
  Glass flange, heat exchanger

GINSEAL PTFE -based gasket materials are able to withstand significantly more aggressive chemical environments (including highly oxidizing environments) than standard non-asbestos gasket materials. However, their temperature, pressure and mechanical performance are inferior to standard non-asbestos gasket materials. Metal inserted and expanded PTFE is able to operate at higher pressures.

Features:

1. Resistant to strong acids and strong alkalis, resistant to almost all chemical media, except molten alkali metals and elemental fluorine.
2. Outstanding insulation performance, good weather resistance, and weather resistance.
3. The coefficient of friction is low, and it is not easy to bond, easy to install and remove
4. The product is clean and can be used in food, medicine and other sealed parts that are not allowed to be contaminated
5. High mechanical strength, good turning performance, and easy processing into different sealed products.
5. The coefficient of linear expansion is low, and it is easy to produce creep or stress relaxation when cold flow and high temperature occur after compression. It is not suitable for high temperature and high-pressure parts.

Packages &.Shipment:

PTFE Sheet

PTFE Enveloped Non Asbestos Gasket

PTFE Joint Sealant

Carbon Fiber Packing Impregnated PTFE

The post PTFE / Teflon Gasket appeared first on .

As a professional graphite gasket manufacturer, there are 4 types of Reinforced Graphite Gasket in our factory:

1、Pure Graphite Gasket

• Item No.: JSG-RG10
• Made of Flexible Graphite Gasket which contains typically 98% graphite, High-temperature resistance graphite gasket material offers SUPERIOR high-temperature sealing
• Laminated Graphite gaskets constructed exclusively of layers of pure graphite make the desired thickness.

2、Reinforced Graphite Gaskets

• Item No.: JSG-RG20
• Comprising two outer layers of graphite foil with a central stainless steel core 0.05mm thick, The layers are bonded together in-house with a unique high-temperature adhesive bonding system that does not delaminate during punching, storage, and use.
• With/without eyelets
• All above reinforced graphite gasket sealer can be metal eyeleted
• The metal eyeleted flat gaskets offer special protection against blowout For the sealing of critical or dangerous media

3、Graphite SS Tanged Gasket

• Item No.: JSG-RG30
• Comprising two outer layers of graphite foil with a central tanged Stainless steel core 0.1mm thick, The layers are mechanically pressed together in-house with a laminating technique that does not delaminate during punching, storage, and use.
• With/without eyelets
• All above gasket can be metal eyeleted
• The metal eyeleted flat gaskets offer special protection against blowout for the sealing of critical or dangerous media.

4、Graphite Gasket with SS wire mesh

• Item No.: JSG-RG40
• Comprising a stainless wire mesh and 2 layers 98% graphite

How to order reinforced graphite gasket

• Standard: For example ASME B 16.21
• Size: 1/2″150 or special like 21X33X3
• Material: Pure Graphite or Graphite tanged SS304
• Type: With outer eyelets or with eyelets inner & outer

Packages &.Shipment:

As a leading sealing gasket manufacturer, Ginseal has been involved in varieties of material gasket manufacturing, like rubber gasket, metal gasket, neoprene gasket, silicone gasket, PTFE gasket, EPDM gasket, and many other high-temperature gaskets for virtually all industries, including oil, gas, water, food processing, etc.  It’s suitable for pipes, valves, pumps, pressure vessels, heat exchangers, condensers, generators, air compressors, exhaust pipes, refrigerators, etc.

Expanded Graphite Packing

Graphite Tape / Self-Adhesive Graphite Tape

Flexible Graphite Sheet

Eyelets Wrapping Machine For Tanged Graphite Gasket

The post Reinforced Graphite Gasket appeared first on .

We make non-asbestos gasket and gasket sheet good quality with the best price

RF gasket is raised face type gasket for raised face flanges, while FF gasket is for full-face type flanges
Please contact Ginseal team for advice to choose the proper material for your use.

Packages &.Shipment:

PTFE Enveloped Non Asbestos Gasket

PTFE / Teflon Gasket

Non-Asbestos Sheet

Spiral Wound Gasket

The post Non-asbestos Gasket appeared first on .

In Ginseal, there are 6 types of metal jacketed gasket to supply:

1. Single Jacketed Gasket
   • Item No.: JSG-MJ10
   • Intended for narrow applications. Consists of a soft filler encased with metal on one face and both edges.
2. Single Jacketed Gasket With Overlap
   • Item No.: JSG-MJ20
   • Where full coverage is needed and the flange is narrow relative to gasket ID.
   • Intended for use when the fully enclosed jacket is needed in narrower widths
3. Double Metal Jacketed Gasket
   • Item No.: JSG-MJ30
   • Where full coverage is needed and the flange is wide relative to gasket ID.
4. Double Metal Jacketed Gasket With Double Shell
   • Item No.: JSG-MJ40
   • Stronger and more rigid than double jacket gasket.
5. Double Jacketed Corrugated
   • Item No.: JSG-MJ50
   • Corrugations create a labyrinth seal across the gasket face.
6. Welded Metal Jacketed Gaskets
   • Welded metal-jacketed gaskets are manufactured in a wide range of sizes
     And styles.

An economical seal for where sealing faces are narrow and it can be produced in a variety of shapes. It is used for heat flanges, exhaust gases, narrow flanges. GINSEAL metal jacketed gaskets are made of a thin metallic outer shell that contains a resilient filler material. The metal casing protects the filler and is resistant to pressure, temperature and corrosion.

Advantages：

• Economical
• Easy to handle and install
• Suitable for high temperature
• Suitable for narrow flanges
• Good blow-out resistance

Metal Jacketed Gasket Material

• Jacketed material: Carbon steel, soft iron, SS304, SS316, 316L, SS321,
  SS410, brass, copper, Inconel
• Filler material: Non-asbestos, graphite,

Benefits over one-piece gaskets with integral bars:

• Lower price – Costs savings 10% to 40%
• Quicker delivery – Less time to manufacture
• Technically superior and safer – Extra sealing safeguards give a better Gasket
• Longer sealing life – seal independently of the outer ring.

How to order

• Size: 810x830x3.2
• Material: SS304+Graphite
• Type: Double Jacketed Gasket Flat ring (without bars)
• Double Jacketed Gasket R type (with one center bar)

Packages &.Shipment:

Spiral Wound Gasket

Kammprofile Gasket – Grooved Gasket

Metal Jacketed Gasket Machine

Metal Shaping Machine For Eyelet Gasket

The post Metal Jacketed Gasket appeared first on .

To be the leading corrugated gasket supplier, Ginseal has 300 pieces of manufacturing machines and die casting equipment for gasket manufacturing from the commercial and industrial metal gasket, spiral gasket, rubber gasket, ring gasket, kammprofile gasket, graphite gasket, grooved metal gasket, EPDM gasket, PTFE gasket, and most any other material gasket.

GINSEAL corrugated gasket is comprised of thin metal sheets with pressed corrugations – usually concentric around the bore, consisting of a corrugated metallic core enveloped by a graphite coating.

Excellent micro sealing performance form the graphite is combined with the strength of the metallic core
The gaskets can be direct replacements for spiral wound gaskets and can eliminate inward buckling issues while creating a seal at moderate flange stresses, Suitable for irregular flanges

Advantage

Surface configuration with corrugations enables the gasket to adapt to rough or irregular flange surfaces without undue compressive load.
It provides an efficient seal under varying conditions of temperature and pressure.
It can be custom made in any suitable metal.

Operating range

Pressure: P = 100 bar Temperature: T = -20 ° C…+280 ° C Chemical resistance: PH = 0…14

How to order

• Standard size: : Corrugated Gasket(EN1514-4 DN100 PN40) Material: S316 +Graphite
• Non-standard: Specified size like 950x910x3
• Material: SS316+Graphite

Packages &.Shipment:

Graphite Tape / Self-Adhesive Graphite Tape

PTFE Sheet

PTFE Enveloped Non Asbestos Gasket

Spiral Wound Gasket

The post Corrugated Gaskets appeared first on .